Hidemy name vpn 2 0

(3 days), 0 for no timeout). range[0-259200] set login-attempt-limit {integer} SSL VPN maximum login attempt times before block (0 - 10, default = 2, 0 = no limit). range[0-4294967295] set login-block-time {integer} Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec, default = 60). range[0-4294967295] set login-timeout {integer} SSLVPN maximum login timeout (10 - 180 sec, default = 30). range[10-180] set dtls-hello-timeout {integer} SSLVPN maximum DTLS hello timeout (10 - 60 sec, default = 10). range[10-60] config tunnel-ip-pools edit {name} # Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients. set name {string} Address name. size[64] - datasource(s): firewall.address.name,firewall.addrgrp.name next config tunnel-ipv6-pools edit {name} # Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients. set name {string} Address name. size[64] - datasource(s): firewall.address6.name,firewall.addrgrp6.name next set dns-suffix {string} DNS suffix used for SSL-VPN clients. size[253] set dns-server1 {ipv4 address} DNS server 1. set dns-server2 {ipv4 address} DNS server 2. set wins-server1 {ipv4 address} WINS server 1. set wins-server2 {ipv4 address} WINS server 2. set ipv6-dns-server1 {ipv6 address} IPv6 DNS server 1. set ipv6-dns-server2 {ipv6 address} IPv6 DNS server 2. set ipv6-wins-server1 {ipv6 address} IPv6 WINS server 1. set ipv6-wins-server2 {ipv6 address} IPv6 WINS server 2. set route-source-interface {enable | disable} Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface. set url-obscuration {enable | disable} Enable to obscure the host name of the URL of the web browser display. set http-compression {enable | disable} Enable to allow HTTP compression over SSL-VPN tunnels. set http-only-cookie {enable | disable} Enable/disable SSL-VPN support for HttpOnly cookies. set deflate-compression-level {integer} Compression level (0~9). range[0-9] set deflate-min-data-size {integer} Minimum amount of data that triggers compression (200 - 65535 bytes). range[200-65535] set port {integer} SSL-VPN access port (1 - 65535). range[1-65535] set port-precedence {enable | disable} Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface. set auto-tunnel-static-route {enable | disable} Enable to auto-create static routes for the SSL-VPN tunnel IP addresses. set header-x-forwarded-for {pass | add | remove} Forward the same, add, or remove HTTP header. pass Forward the same HTTP header. add Add the HTTP header. remove Remove the HTTP header. config source-interface edit {name} # SSL VPN source interface of incoming traffic. set name {string} Interface name. size[35] - datasource(s): system.interface.name,system.zone.name next config source-address edit {name} # Source address of incoming traffic. set name {string} Address name. size[64] - datasource(s): firewall.address.name,firewall.addrgrp.name next set source-address-negate {enable | disable} Enable/disable negated source address match. config source-address6 edit {name} # IPv6 source address of incoming traffic. set

That is added later by Easy VPN takes precedence and the traffic goes through the Easy VPN virtual-access interface. Easy VPN "ezvpn2" Tunnel Is Up Router# show crypto ipsec client ezvpnEasy VPN Remote Phase: 6Tunnel name : ezvpn1Inside interface list: Ethernet0/0Outside interface: Virtual-Access2 (bound to Ethernet1/0)Current State: CONNECT_REQUIREDLast Event: TRACKED OBJECT UPSave Password: DisallowedCurrent EzVPN Peer: 10.75.1.2Tunnel name : ezvpn2Inside interface list: Ethernet0/0Outside interface: Virtual-Access3 (bound to Serial2/0)Current State: IPSEC_ACTIVELast Event: SOCKET_UPDNS Ezvpn1: 10.6.0.2NBMS/WINS Ezvpn1: 10.7.0.1Default Domain: cisco.comSave Password: DisallowedCurrent EzVPN Peer: 10.75.2.2Router# show ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route The gateway of last resort is 0.0.0.0 to network 0.0.0.0. 10.0.0.0/8 is variably subnetted, 3 subnets, 2 masks! The next line is the Easy VPN route.S 10.75.2.2/32 [1/0] via 10.76.1.1C 10.76.2.0/24 is directly connected, Serial2/0C 10.76.1.0/24 is directly connected, Ethernet1/0C 192.168.1.0/24 is directly connected, Ethernet0/0! The next line is the Easy VPN route.S* 0.0.0.0/0 [1/0] via 0.0.0.0, Virtual-Access3 One default route and one route to the peer is added as shown above. Easy VPN "ezvpn2" Is Up and Easy VPN "ezvpn1" Is Initiated Router# crypto ipsec client ezvpn connect ezvpn1Router# show crypto ipsec cli ent ezvpnEasy VPN Remote Phase: 6Tunnel name : ezvpn1Inside interface list: Ethernet0/0Outside interface: Virtual-Access2 (bound to Ethernet1/0)Current State: READYLast Event: CONNECTSave Password: DisallowedCurrent EzVPN Peer: 10.75.1.2Tunnel name : ezvpn2Inside interface list: Ethernet0/0Outside interface: Virtual-Access3 (bound to Serial2/0)Current State: IPSEC_ACTIVELast Event: SOCKET_UPDNS Ezvpn1: 10.6.0.2NBMS/WINS Ezvpn1: 10.7.0.1Default Domain: cisco.comSave Password: DisallowedCurrent EzVPN Peer: 10.75.2.2Router# show ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP

NAT or PAT configuration that was automatically created for the VPN connection using the show ip nat statistics command. The "Dynamic mappings" field of this display gives the details for the NAT or PAT translation that is occurring on the VPN tunnel. DETAILED STEPS Step 1 Display the current state of the Cisco Easy VPN Remote connection using the show crypto ipsec client ezvpn command. The following is typical output for a Cisco 1700 series router using client mode: Example:Router# show crypto ipsec client ezvpn Tunnel name : hw1 Inside interface list: FastEthernet0/0, Serial0/0, Outside interface: Serial1/0 Current State: IPSEC_ACTIVE Last Event: SOCKET_UP Address: 10.0.0.5 Mask: 255.255.255.255 Default Domain: cisco.comTunnel name : hw2 Inside interface list: Serial0/1, Outside interface: Serial1/1 Current State: IPSEC_ACTIVE Last Event: SOCKET_UP Default Domain: cisco.com Step 2 Display the NAT or PAT configuration that was automatically created for the VPN connection using the show ip nat statistics command. The "Dynamic mappings" field of this display gives the details for the NAT or PAT translation that is occurring on the VPN tunnel. Example:Router# show ip nat statistics Total active translations: 0 (0 static, 0 dynamic; 0 extended)Outside interfaces: cable-modem0Inside interfaces: Ethernet0Hits: 1489 Misses: 1Expired translations: 1Dynamic mappings:-- Inside Sourceaccess-list 198 pool enterprise refcount 0 pool enterprise: netmask 255.255.255.0 start 192.168.1.90 end 192.168.1.90 type generic, total addresses 1, allocated 0 (0%), misses 0\ If you are seeing IPSEC_ACTIVE in your output at this point, everything is operating as expected. Configuring Save Password To configure the Save Password feature, perform the following steps. SUMMARY STEPS 1. enable 2. configure terminal 3. password encryption aes 4. crypto ipsec client ezvpn name 5. username name password {0 | 6} {password} 6. exit 7. show running-config DETAILED STEPS Command or Action Purpose Step 1 enable Example: Router> enable Enables privileged EXEC mode. Enter your password if prompted. Step 2 configure terminal Example: Router# configure terminal Enters global configuration mode. Step 3 password encryption aes Example: Router (config)# password encryption aes Enables a type 6 encrypted preshared key. Step 4 crypto ipsec client ezvpn name Example: Router (config)# crypto ipsec client ezvpn ezvpn1